Figure 2(b) Dependence of the device resistance on the pulse amplitude and pulse number
datasetposted on 27.03.2019 by le zhao, Jie Xu, Xiantao Shang, Xue Li, Qiang Li, Shandong Li
Datasets usually provide raw data for analysis. This raw data often comes in spreadsheet form, but can be any collection of data, on which analysis can be performed.
The device was stimulated by square with varying amplitudes. Pulses were numbered by 1,2,3,....Resistance was measured after each pulse. The resistance recorded here was calculated by dividing the measured_voltage by measured_current.